防静电型ABS耗材
产品简介
FusForce™ABS-ESD是一款基于多壁碳纳米管填充的ABS防静电材料，得益于该材料优秀的可打印性和静电耗散特性，ABS-ESD适用于常规制造业和电子工业。
FusForce™ ABS-ESD选用的主要原料是一款由连续本体法合成的ABS树脂，得益于这种先进的生产工艺，生产过程中使用的溶剂和单体在最终ABS成品中的残留量极低，因此耗材在打印过程中的具有较低的气味性。
物性表
测试项目 Property | 测试方法 Test Method | 典型值 Typical value |
密度 Density | ISO 1183 | 1.05 g/cm³ |
玻璃化转变温度 Glass transition temperature | ISO 11357 | 80°C |
熔融指数 Melt index | 280°C, 5kg | 2 g/10min |
热变形温度 Determination of temperature | ISO 75：Method A ISO 75：Method B | 70°C (1.8MPa) 75°C (0.45MPa) |
拉伸模量 Young’s Modulus （X-Y） | ISO 527 | 2352.06±30.47 MPa |
拉伸断裂强度 Tensile breaking strength （X-Y） | 34.00±0.16 MPa | |
断裂伸长率 Elongation at break （X-Y） | 2.21±0.08 % | |
拉伸强度 Tensile breaking strength （Z） | ISO 527 | 19.38±0.16 MPa |
拉伸模量 Young’s Modulus （Z） | 1759.74±55.60 MPa | |
断裂伸长率 Elongation at break （Z） | 1.58±0.09 % | |
弯曲强度 Bending strength （X-Y） | ISO 178 | 54.28±0.56 MPa |
弯曲模量 Bending Modulus （X-Y） | 2337.91±20.62 MPa | |
缺口冲击强度 Charpy impact strength （X-Y） | ISO 179 | 6.47±0.6 KJ/㎡ |
试样打印参数：喷嘴直径0.4mm，喷嘴温度260℃，底板加热80℃，打印速度100mm/s，填充率100%，填充角度±45°
Specimens printed under the following conditions: Nozzle size 0.4mm，Nozzle temp 260°C, Bed temp 80°C, Print speed 100mm/s, Infill 100%, Infill angle ±45°
测试方法 Test Method | ANSI ESD S11.11 | |||
表面电阻率Ω/sq surface resistivity | 240°C | 250°C | 260°C | 270°C |
X-Y | 108*-0 | 107 | 106 | 105 |
X-Z | 109 | 108 | 107 | 106 |
试样打印参数：样件厚度2mm，喷嘴直径0.4mm，底板加热80°C，打印速度100mm/s，填充率100%，填充角度±45°
Specimens printed under the following conditions: Specimens thickness 2mm,Nozzle size 0.4mm,Bed temp 80°C, Print speed 100mm/s, Infill 100%, Infill angle ±45°
建议打印参数
喷头温度 Nozzle Temperature | 250-270°C |
建议喷嘴大小 Recommended Nozzle Diameter | ≥0.2 mm |
建议底板材质 Recommended build surface treatment | Glass、PEI Film or PC Film |
底板温度 Build plate temperature | 80-90°C |
Raft间距 Raft separation distance | 0.16-0.18 mm |
冷却风扇 Cooling fan speed | Off-30 % |
打印速度 Print speed | 30-150 mm/s |
回抽距离 Retraction distance | 1-5 mm |
回抽速度 Retraction speed | 1800-3600 mm/min |
其他建议 1. ABS-ESD材料相比PLA，PETG等材料在打印过程中需要有较高的环境温度来帮助释放零件成型过程中的残余应力，在打印过程中请将打印机保持封闭状态，可以有效避免打印零件出现翘曲和开裂现象。如果设备具有加热腔功能，建议将加热腔温度设置在40-60°C之间。 2. 长期打开包装后的ABS-ESD线材，如打印过程中发现打印质量下降，请将线材置于70-80℃条件下干燥4-6h。 3. 虽然ABS-ESD与同类产品相比气味更小，但仍然建议在打印时将打印机放置在通风环境中。 4. 请在对模型进行打磨、切割等过程中穿戴个人防护用品，包括口罩、手套、护目镜等。
Additional Suggestions： 1. Compared with PLA, PETG and other materials, ABS materials need a higher chamber temperature to help release the residual stress during the printing process. Please keep the printer chamber closed during the printing process. It can effectively avoid printed parts from warping and cracking. If the device has a heated chamber, it is recommended to set the temperature of heated chamber between 40-60°C. 2. If the ABS-ESD filament has been unpacked for a long time and the printing quality starts to degrade during the printing process, please dry the filament at 70-80°C for 4-6 hours before printing. 3. Although ABS-ESD has much less odor compared with similar products, it is still recommended to place the printer in a well-ventilated area during printing. 4. Please wear personal protective equipment, including masks, gloves, goggles, etc., when sanding and cutting the model. | |
